Products: heco

High quality fully approved products from our partners in Germany.

Choose from the vast range of sizes and headstyles available in the top quality Hecofix plus range. The new Heco Topix range for timber framed buildings .. available up to M10 x 450mm.

Multi monti, the first screw anchor to hold ETA option 1 approval for cracked concrete! Fixings for soft roof insulation and building renovation, all with building regulation approval.

For more information on our partners, please follow this link >>

If considering structural timber screws or professional screws for timberframe construction, please download and read the following product selection advice>>

Please see video tape of the patented HECO-TOPIX – CombiConnect the new generation of wood construction screws with it’s variable thread allows you to achieve much higher tension loads.

All Heco products are listed below - to view a product, click the title, to close, click the title again. Individual prodcuct brochures are listed below

Download Topix brochure

Download Topix Combi Connect & Therm brochure

Download Fix Plus brochure

Download Topix Flange Head brochure

HECO FIX PLUS® - POZI


powerline drywall screw sharp point
Description:

High performance multi material screw with serrated teeth
Large size range, BZP and zinc / yellow. Countersunk, pan head and raised head available. Milled ribs and drilled head available, also available stainless steel.

Specification:
  • Diameter: 2.5mm ~ 6.0mm
  • Length: 10mm ~ 300mm
  • Packing: 200 ~ 1000
Application:

Can be used in timber, PVCu, masonry, aerated block and up to 2mm steel. No pre-drilling in most materials.

HECO FIX PLUS® - T DRIVE


powerline drywall screw sharp point
Description:

High performance multi material screw with serrated teeth
Large size range, BZP and zinc / yellow. Improved security over pozi drive. Countersunk, pan head and raised head available. Milled ribs and drilled head available, also available stainless steel. T Drive recess to prevent cam out.

Specification:
  • Diameter: 2.5mm ~ 6.0mm
  • Length: 10mm ~ 300mm
  • Packing: 200 ~ 1000
Application:

Can be used in timber, PVCu, masonry, aerated block and up to 2mm steel.

HECO FIX PLUS - BACKWALL SCREW


powerline drywall screw sharp point
Description:

Backwall screw. Flange, Pozi BZP.

Specification:
  • 3.0 x 20mm ~ 5.0 x 60 Serrated thread
  • Full thread
Application:

Panels to cabinet furniture.

HECO TOPIX - FLOORING SCREW (Glazing bead screw)


powerline drywall screw sharp point
Description:

Flooring screw (glazing bead screw). Raised countersunk, T-10 Milled ribs, BZP and ZYP.

Specification:
  • 3.5 x 30 ~ 3.5 x 60 (Pozi)
  • 3.5 x 30 ~ 3.5 x 40 (T-Drive)
  • Box qty: 200 ~ 1000
Application:

Tongue and groove flooring – hard and soft woods.
Also suitable for glazing beads.
Available in A2 stainless steel for facades.

MULTI MONTI® HEX, MULTI MONTI® HEX FLANGE HEAD


powerline drywall screw sharp point
Description:

The first screw anchor with ETA option 1 approval.

Specification:
  • Diameter: 6mm ~ 20mm
  • Length: 50mm ~ 160mm
  • Box qty: 25 ~ 100's
Application:

Stress free installation in brick, stone and block. Close to edge & close grouped installation possible. Reusable, ideal for maintenance situations. Through fixing saves time and money.

ETA logo

MULTI MONTI COUNTERSUNK HEAD


powerline drywall screw sharp point
Description:

The first screw anchor with ETA option 1 approval.

Specification:
  • Diameter: 5mm ~ 7.5mm
  • Length: 30mm ~ 160mm
  • Box qty: 50 ~ 200
Application:

Stress free installation in brick, stone and block. Close to edge & close grouped installation. Convenient T-drive. Through fixing saves time and money. ETA 05/0010 – Please refer to price list / technical manual for applicable sizes.

ETA logo

MULTI MONTI A4 STAINLESS STEEL


powerline drywall screw sharp point
Description:

The only stainless steel screw anchor with ETA option 1 approval.

Specification:
  • Diameter: 7.5mm ~ 12mm
  • Length: 65 ~ 120mm
  • Box qty: 25 ~ 50
Application:

Ideal for use in extreme enviroments. Reusable, ideal for maintenance situations. Bi-metal design for reliability. ETA 05/0011 – Please refer to price list / technical manual for applicable sizes. sizes.

ETA logo

MULTI MONTI TC TIMBER CONNECT


powerline drywall screw sharp point
Description:

The perfect combination of screw anchor and wood screw.

Specification:

Sizes in the range of:

  • 7.5 x 100
  • 10 x 130
  • 12 x 160
Application:

Ideal for securing wood components to solid masonry and concrete. Transmission of high tensile and shear forces without any additional construction measures. Can be countersunk, so a single length covers a large number of timber thicknesses. Ideal for sole plates.

 

HEX & WASHER


powerline drywall screw sharp point
Description:

Hex + Washer. Hexagon head including washer DIN 440 BZP.

Specification:
  • 12.0 x 180 ~ 320
  • Length: 16mm ~ 100mm
Application:

Soleplate anchor.

 

STUDBOLT


powerline drywall screw sharp point
Description:

Screw in anchor with metric stud. BZP

Specification:
  • 6.0 x 60 - stud: M6 x 5
  • 7.5 x 70 - stud: M8 x 14
  • 7.5 x 160 - stud: M8 x 14
  • 10.0 x 80 - stud: M10 x 11
  • 10.0 x 160 - stud: M10 x 11
Application:

ETA 05/0010 - Please refer to price list/technical manual for applicable sizes. For use with fixings with internal metric thread.

ETA Logo

TYPE MMSI - WITH FEMALE METRIC THREAD


powerline drywall screw sharp point
Description:

Type MMSI – with female metric thread . Screw in anchor with internal metric thread. BZP.

Specification:
  • 7.5 x 60, 10.0 x 80 with internal combi thread M8/M10
  • 10.0 x 80 with M10 internal
Application:

For use with threaded rod. ETA 05/0010 - Please refer to price list/technical manual for applicable sizes.

ETA Logo

FLANGE HEAD


powerline drywall screw sharp point
Description:

Flange head with T-30 recess BZP.

Specification:
  • 7.5 x 45, 7.5 x 50 (head dia. 17mm)
  • 7.5 x 60 (head dia. 14.5mm)
Application:

Assembly rail fixing.

 

PAN HEAD


powerline drywall screw sharp point
Description:

Pan head with T-Drive recess BZP.

Specification:
  • 5.0 x 30 ~ 10.0 x 70
Application:

Baseplate anchor.ETA 05/0010 - Please refer to price list/technical manual for applicable sizes.

ETA Logo

EYE BOLT


powerline drywall screw sharp point
Description:

Eye bolt anchor BZP.

Specification:
  • 6.4 x 40
Application:

Installation of M & E/H & V services.

 

HECO UNIX® - PLUS


powerline drywall screw sharp point
Description:

Countersunk with milling grooves. Full thread with patented variable pitch. Toothed thread. BZP.

Specification:
  • 3.5 x 20 ~ 6.0 x 120
Application:

Gives compression effect when fixing wood and chipboard panels, general wood joint construction. 'Plus' tip for improved positioning and driving in man-made boards. Thread pulls the joint together without additional bracing.

 

HECO UNIX® - TOP


powerline drywall screw sharp point
Description:

Countersunk with milling grooves. Full thread with patented variable thread pitch. With 'Topix' tip. BZP.

Specification:
  • 3.5 x 30 ~ 6.0 x 160
Application:

Gives compression effect when fixing wood and chipboard panels, general wood frame construction. Topix tip reduces splitting of material in softwood and most hardwood. Thread pulls the joint together without additional bracing.

 

HECO UNIX® - TOP


powerline drywall screw sharp point
Description:

Raised countersunk with patented milling grooves. Full thread with variable thread pitch. With 'Topix' tip. A2 stainless steel.

Specification:
  • 5.0 x 40 ~ 5.0 x 80
Application:

Compression effect in facade construction.

 

PLEASE note: Product advice Heco Topix Wood Construction Screws:

Heco Topix professional woodscrews have been designed specifically for use in softwood and hardwood without pre-drilling. They are available in both carbon steel and stainless steel to maximise suitability across a broad range of applications. There are, however, some instances when it is advisable to either pre-drill or use stainless steel instead of carbon steel. This is because of the natural variations that occur in hardwoods dependant on species, age and humidity. In addition, application loads and uniformity of the joint may vary.

We would recommend spot tests are carried out prior to full installation. Due to high levels of naturally occurring acids within certain timbers it is advisable to use stainless steel fixings in the following materials: Unprocessed European Oak, Western Red Cedar, Sweet Chestnut, Douglas Fir. The above list is by no means exhaustive and is provided as guidance only.

HECO TOPIX - PROFESSIONAL TIMBER SCREW - COUNTERSUNK


powerline drywall screw sharp point
Description:

Professional T - drive structural timber screw with countersunk head. Zinc and Yellow coating, also available stainless steel. Assessed by TRADA technologies to BS:5268 and relevant EC5 design codes. Calculation software available. ETA in application.

Specification:
  • Diameter: 6mm ~ 10mm
  • Length: 80mm ~ 450mm
  • Box qty: 100
  • Stainless available
Application:

Shank ribs and patented point reduce drive torque. German regulation approved. T-40 drive recess for secure installation, no pre-drilling in most timbers. Ideal for structural timber to timber connections.

TRADA logo

 

HECO TOPIX - PROFESSIONAL TIMBER SCREW - FLANGE WASHER HEAD


powerline drywall screw sharp point
Description:

T-drive structural timber screw, with flange head. Zinc and yellow coating, also available stainless steel. Assessed by TRADA technologies to BS:5268 and relevant EC5 design codes.Calculation software available. ETA in application.

Specification:
  • Diameter: 6mm ~ 10mm
  • Length: 80mm ~ 450mm
  • Box qty: 100
Application:

T-40 drive recess for secure installation. No pre-drilling in most timbers. Shank ribs and patented point reduce drive torque. German building regulation approved. Ideal for structural timber to timber connections.

TRADA logo

 

HECO TOPIX T FOR BUILDING INSULATION


powerline drywall screw sharp point
Description:

Approved and certified product for securing soft insulation systems in facades and roofs. T-40 drive recess for safe and secure installation. Calculation software available. Certified to DIN 1052 / 2004-08.

Specification:
  • Diameter: 8mm
  • Length: 200mm ~ 450mm
  • Box qty: 50 ~ 100's
Application:

Topix T transfers compressive and shear loads away from the soft insulation material.

 

 

HECO TOPIX CC FOR ROOFING TRUSSES GLULAM AND TIMBER BEAMS


powerline drywall screw sharp point
Description:

Approved and certified product for high load bearing timber connections such as Glulam, rafter / purlins, flooring and building renovation work. Assessed by TRADA technologies to BS:5268 and relevant EC5 design codes. Calculation software available. ETA in application.

Specification:
  • Diameter: 6.5mm & 8.5mm
  • Length: 100mm ~ 400mm
  • Box qty: 50 ~ 100's
Application:

Head design gives an invisable fixing with a high fire rating. T-drive for safe and secure installation. Screws accept the loads normally applied to the timber.

TRADA logo

 

 

Other Product Lines

heco
calculation software

Heco Calculation Software

for a copy of our Heco calculation software, please CONTACT US

heco
Heco Topix combi connect

Heco topix combi connect

High load bearing fully threaded structural timber screws with clamping effect.

MORE

heco
Heco Multi monti

Multi-Monti
Timber Connect

Ideal for securing timber components such as sole plates to solid masonry and concrete.

MORE